Industrial Nanobubble System HQN-S020
An industrial circulation system that combines an industrial pump with the HQN-020M bubble mixer to produce nanobubble water. It is applied to industrial processes such as pipe and circulating water management, industrial cleaning, water treatment and oxygen transfer.
- Treatment flow rate
- 20 m³/h
- Operating pressure
- 4.0–5.0 bar
- Gas used
- Air · Oxygen · Nitrogen (ozone optional)
- Installation
- Circulation
Tell us your application, treatment flow, target water and tank/piping conditions, and we will review a site configuration.
Benefits in industrial circulating water treatment and processes
Depending on site water quality, contamination, gas used and operating conditions, it can be used for pipe and circulating water management and process improvement. Actual effects vary with the target process and operating conditions.
For industrial circulation treatment and cleaning processes
Nanobubbles are applied by circulation after checking target water and tank/piping conditions. Gas and detailed configuration are set by the application.
Pipe & circulating water management
Water quality and internal fouling management in domestic wastewater, process water and circulation systems
Industrial cleaning
Better cleaning water for equipment, parts and surface cleaning
Water treatment
Supporting system for sewage and wastewater treatment, pre-treatment and existing water treatment processes
Oxygen transfer & gas dissolution
Oxygen transfer and gas–liquid contact processes using air, oxygen, nitrogen or ozone
When HQN-S020 is a good fit
- Sites that want to apply nanobubbles while circulating water through tanks or pipes
- When adding a nanobubble system to existing piping or water treatment processes
- When air, oxygen, nitrogen or ozone is being considered for the process purpose
- When an industrial system with about 20 m³/h circulation flow is needed
When prior review is needed
- If pipes are physically blocked by solids or fibers, the cause of blockage and pipe condition are checked first
- If mineral scale is the main cause, scale composition and precipitation conditions are reviewed together
- If high concentrations of grease or sludge flow in continuously, a process configuration including pre-treatment is reviewed
- If ozone nanobubbles are used, ozone concentration, wetted-part materials, exhaust and safety conditions are reviewed
Circulation system configured for industrial sites
The pump, piping, materials and gas supply are configured around the HQN-020M bubble mixer to suit site conditions.
Nanobubble water surface cleaning comparison test
Results of Honour Tech's surface cleaning comparison test with nanobubble water, showing its cleaning characteristics.
Oily contamination on glass (4 types of oil-based marker)
- Result
- About 50% higher cleaning efficiency index (based on a residual-area comparison)
- Comparison conditions
- Oxygen nanobubble water (2.5 bar) vs. tap water (4.5 bar) · straight-jet nozzle spray · visual comparison of residues
- Evidence
- Technology comparison test · Measured
Results vary with contaminant type, surface material, spray pressure, gas used and operating conditions. The test was carried out with oxygen nanobubble water.
Circulation treatment linked to industrial tanks and pipes
Target water is pumped through the bubble mixer for treatment and returned to the existing tank or circulation system.
Swipe left or right to see the full table.
-
Target water intake
A pump draws water from the tank or circulation system.
-
Gas mixing & nanobubble generation
Gas suited to the purpose is mixed in and passed through the HQN-020M bubble mixer.
-
Circulation
The nanobubble water is returned to the same tank or circulation system for repeated operation.
HQN-S020 Specifications
An industrial circulation nanobubble system in the 20 m³/h class. Pump, piping, wetted-part materials and gas supply are adjusted to the application and site conditions.
| Item | HQN-S020 |
|---|---|
| Product type | Industrial nanobubble system |
| Base series | HQN High-Density Nanobubble System |
| Bubble mixer | HQN-020M |
| Treatment flow rate | 20 m³/h |
| Operating pressure | 4.0–5.0 bar |
| Installation | Circulation |
| Gas used | Air · Oxygen · Nitrogen / Ozone (optional; materials change when ozone is used) |
| Power supply | 380 V three-phase (determined by pump specification) |
| Wetted-part materials | SUS316, polycarbonate, etc. |
| Pump | Selected according to application conditions |
| Piping configuration | Determined by site conditions |
Published specifications. For configurations tailored to site conditions, please contact us.
Scope of supply, from technical consultation to delivery and installation
Built around an industrial pump and the HQN-020M bubble mixer, with piping, electrical and gas configuration adjusted to the application and site conditions.
Basic configuration
- HQN-020M bubble mixer · nanobubble generating section
- Industrial pump · selected according to flow, head and site conditions
- Housing and base · basic structure for site installation
- Electrical, controls and internal piping · configured to the final specification
Site preparation
- Target tank or circulation piping · the circulation system to connect to the unit
- Installation space · space for the unit and maintenance
- Power · 380 V three-phase standard, determined by pump specification
- Connection piping · determined by site pipe size and layout
- Gas source · when gases other than air are used
Information needed for a quote
- Application and treatment flow · pipe management, cleaning, water treatment, oxygen transfer, etc., and required circulation flow
- Target water, tank and piping conditions · water characteristics, tank capacity, pipe size and length, and installation environment
From technical consultation to delivery and installation
-
Inquiry
Send us your application and basic site information.
-
Site check
We check target water, tank, piping, power and gas conditions.
-
Specification & quote
We propose a pump, piping and system configuration suited to site conditions.
-
Manufacturing & delivery
Manufacturing begins once the final specification is confirmed; lead time is given with the quote.
-
Warranty & service
The warranty period is 1 year from the date of delivery.
HQN-S020 FAQ
Answers to key technical and adoption questions when considering HQN-S020.
What can HQN-S020 be used for?
It can be applied to pipe and circulating water management, industrial cleaning, water treatment, oxygen transfer and gas dissolution processes.
Suitable gases and operating conditions are reviewed after checking the target water and process purpose.
Can it be used on domestic wastewater piping?
It can be considered for any tank and piping system that can be circulated.
The circulation method and operating conditions are set after checking contaminant type, inflow characteristics, piping structure and the cause of blockages.
Can it clear pipe blockages?
Applicability depends on the cause and condition of the blockage.
Causes vary, including organic deposits, sediment, solids, fibers and mineral scale, so the target contaminants and pipe conditions are checked first; severe physical blockages may require separate removal or pre-treatment.
Do I need to replace existing equipment entirely?
The system is added using existing tanks and circulation piping.
Suction and discharge connection points, pipe sizes, valves, power and installation space are reviewed for each site.
Which gases can be used?
Air, oxygen and nitrogen can be used, and ozone is optional.
Gas supply equipment, wetted-part materials and safety configuration are reviewed according to gas type and target concentration.
How is the pump selected?
It is selected based on required flow, head, pipe losses and operating conditions.
The treatment flow is 20 m³/h; pump model and power are determined by site piping and required pressure.
Are there models with larger or smaller flows than HQN-S020?
Various HQN models can be configured depending on application flow and operating conditions.
We propose a suitable model after checking water volume, tank capacity, piping conditions and application.
Can ozone nanobubbles also be used?
It can be configured with an ozone specification.
The ozone-ready configuration is designed after checking ozone concentration, wetted-part materials, exhaust, residual ozone and worker safety conditions.
Tell us your site conditions and we will review a suitable configuration. Send us your application, treatment flow, target water and tank/piping conditions, and we will review HQN-S020 application conditions and a quote.
Request a Quote